Next on the agenda for the build was to separate the workshop side of the mancave from the bar / gym side. The main purpose for this was so that every time I’m grinding, painting, or cutting wood in the workshop I don’t end up with a bar covered in overspray or sawdust etc. The first step was to put some plywood backing on the shelves and then fill in the blanks above the existing shelves to seal the two sides.
A door was also going to be an order to seal the two sides whilst retaining access between them.
And from the gym / bar side…
Time for a bit of insulation, more gyprock, some shelving, and finally a coat of paint, and one room became two. Just needs a tidy up with a ceiling and some cornice to complete..
Cheers for looking,