
One room becomes two!
Next on the agenda for the build was to separate the workshop side of the mancave from the bar / …
Next on the agenda for the build was to separate the workshop side of the mancave from the bar / …
For the workshop side of the cave I wanted a good durable floor that also doubled as a dance studio …
Once I’d done the initial clean up and played Tetris with all the stuff I had stored in the cave …
Well, it’s been a while! Due to a work move the mancave build was put on hold for a couple …
OK, so it’s been a while since I’ve posted on this blog – the main reason being that a change …
After playing a bit of Tetris with all my junk in the garage side of my man cave, I created …
The time had finally come to add the high gloss bar top lacquer and seal in all the coins and …
After waxing the mould with a bunch of coats of release wax, I laid down a thick coat of resin …
On the back wheel arches of my kit car are a couple of gaping holes where air intakes are meant …
I finally managed to find a solid few hours to finish the inlay job of all the irregular shaped coins …
Do you ever get the feeling that you’ve bitten off more than you could chew? My De-Type kit car is …
For the centre section of my bar top, my plan is not to have any coins inlayed in it, but …
When I was 20 years old I was living on the Gold Coast, and a local car company was making …
Following on from my last post, I spent a few more hours detailing, filing and sanding my carving to arrive …
This project started as a bit of a means to practice using the Dremel tool before I started taking to …
This is a project that I did a while back but never got around to posting. When we moved into …
Well it’s been one year since I started the man cave build, and I thought I’d take the chance to …
As discussed in a previous post, my plan is to have a bunch of coins and badges that I have …