A long time between drinks!
Well, it’s been a while! Due to a work move the mancave build was put on hold for a couple …
build
Bar Top coin inlay finally finished
I finally managed to find a solid few hours to finish the inlay job of all the irregular shaped coins …
Kit Car project arrives
Do you ever get the feeling that you’ve bitten off more than you could chew? My De-Type kit car is …
Bar top inlay continues
For the centre section of my bar top, my plan is not to have any coins inlayed in it, but …
Finished wood carving
Following on from my last post, I spent a few more hours detailing, filing and sanding my carving to arrive …
Wood carving project begins
This project started as a bit of a means to practice using the Dremel tool before I started taking to …
One year progress report
Well it’s been one year since I started the man cave build, and I thought I’d take the chance to …
Bar top coin inlay
As discussed in a previous post, my plan is to have a bunch of coins and badges that I have …
Bar rail build and install
The plans that I was working with to build the bar (purchased from http://www.barplan.com, a highly recommended website for anyone …
Bar top build
At long last it was time to start attacking the actual bar top. I got my hands on a few …
Under-bar lighting
When I was at the lighting shop to buy the lights for the bar, I came across a set of …
Time to start decorating
Having finished off the main wall in the bar area, I could finally start getting some of my memorabilia out …
Lights and more drywall install
It was now time to turn my attention back to finishing off the walls, and also starting to think about …
Bar foot rest and bar front trim
The bar was now in a stage of completion where I could start thinking about fitting the panels of ply …
Bar back bulkhead build
With the bar nearing completion, I turned my attention to the bulkhead for above the bar back. My goal with …
Bar build continues
With the bar build finally well underway, I wanted to start constructing the bar counter and an overhanging bulkhead for …
The build begins
After a little back and forth with the council about where the house and shed could be positioned on our …
ultimatemancavebuild 